Alexander KORSUNSKY - Publications

The list is organised into the following topics:
 
  • Variational Eigenstrain Analysis of Residual Stresses
  • Diffraction Research in Engineering and Advanced Materials
  • Elasticity and Plasticity
  • Tribology
  • Fracture Mechanics
  • Singular Integral Equations
  • Materials Engineering
  • Rock Mechanics
  • Books and Chapters

  • For more information, browse the selected abstracts or download entire papers marked by the PDF logo  and view them using Acrobat .
    For papers freely available on the Web, click on the Weblink sign  to view or download.

    For my up-to-date e-prints check the arXiv.

    Variational Eigenstrain Analysis of Residual Stresses

    1. Korsunsky A.M. (2005). On the Modelling of Residual Stresses Due to Surface Peening Using Eigenstrain Distributions. Journal of Strain Analysis, 40 (8).
    2. Korsunsky A.M., Regino G., Nowell D. (2004) Variational determination of eigenstrain sources of residual stress. ICCES, Madeira, July 2004.
    3. Korsunsky, A. M., Regino G., Nowell D. (2004). Residual Stress Analysis of Welded Joints by the Variational Eigenstrain Approach. The e-Journal of Nondestructive Testing, ISSN 1435-4934 (Smart Structures and Non-Destructive Testing Session of the 3rd Intl Conf on Experimental Mechanics, ICEM2004, Nov 2004, Singapore).

    Diffraction Research in Engineering and Advanced Materials

    1. Liu, J., K. Kim, M. Golshan, D. Laundy, and A.M. Korsunsky, Energy calibration and full-pattern refinement for strain analysis using energy-dispersive and monochromatic X-ray diffraction. Journal of Applied Crystallography, 2005. 38: p. 661-667.
    2. Golshan, M., J. Liu, K. Kim, D. Laundy, D. Dini, and A.M. Korsunsky, Analysis of plastic deformation and residual elastic strain in a titanium alloy using synchrotron x-ray diffraction. Journal of Physics D-Applied Physics, 2005. 38(10A): p. A195-A199.
    3. Korsunsky, A.M., K.E. Jarnes, and M.R. Daymond, Intergranular stresses in polycrystalline fatigue: diffraction measurement and self-consistent modelling. Engineering Fracture Mechanics, 2004. 71(4-6): p. 805-812.
    4. Korsunsky A.M., Collins S.P., Owen R.A., Daymond M.R., Achtioui S., James K.E., Fast residual stress mapping using energy dispersive synchrotron X-ray diffraction on station 16.3 at the SRS, J. Synchrotron Rad. v.9, p.77-81, 2002.
    5. Jensen, M. V. R. S., D. Dye, James, K.E., Korsunsky, A.M., Roberts, S. M., Reed, R. C. (2002). Residual stresses in a welded superalloy disc: characterization using synchrotron diffraction and numerical process modelling. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science To appear.
    6. Salimon A.I., Korsunsky A.M., Kaloshkin S.D., Tcherdyntsev V.V., Shelekhov E.V., Sviridova T.A., The evolution of crystalline precursors during the formation of Al-Cu-Fe quasicrystalline intermetallics in mechanically alloyed powders, presented at ISMANAM2000, Oxford; Metastable, Mechanically Alloyed and Nanocrystalline Materials, Ismanam-2000 360-3: 137-142..
    7. Salimon, A. I., A. M. Korsunsky, et al. (2001). Crystallochemical aspects of solid state reactions in mechanically alloyed Al-Cu-Fe quasicrystalline powders. Acta Materialia 49(10): 1821-1833.
    8. Korsunsky A.M., Salimon A.I., Pape I., Polyakov A.M., Fitch A.N. In-situ investigation of the solid-state reaction reasulting in the formation of quasicrystals in mechanically alloyed Al-Cu-Fe alloys. ESRF report HS-857, 24-27 June 1999.
    9. Korsunsky A.M., Salimon A.I., Pape I., Polyakov A.M., Fitch A.N. The thermal expansion coefficient of mechanically alloyed Al-Cu-Fe quasicrystalline powders, Scripta Mater., v. 44, p. 217222, 2001.
    10. Korsunsky A.M., Daymond M.R. and Wells K.E., The Development of Strain Anisotropy during Plastic Deformation of an Aluminium Polycrystal, Materials Science Forum v. 347-349, p. 492-497, 2000.
    11. Korsunsky A.M., Wells K.E. and Shaw B.A., A Comparative Study of Diffraction Methods for Strain Measurement in a Particulate MMC, Materials Science Forum v. 347-349, p. 504-509, 2000.
    12. Salimon A.I., Korsunsky A.M., Shelekhov E.V., Sviridova T.A., Preparation and Analysis of Quasicrystalline Phases by High Energy Ball Milling

    13. and X-Ray Diffraction. Materials Science Forum v. 321-324, p. 676-681, 2000.
    14. Korsunsky A.M., Wells K.E., High Energy Synchrotron X-Ray Measurements of 2D Residual Stress States in Metal Matrix Composites. Materials Science Forum v. 321-324, p. 218-223, 2000.
    15. Salimon AI, Korsunsky AM, Ivanov AN, The character of dislocation structure evolution in nanocrystalline FCCNi-Co alloys prepared by high-energy mechanical milling, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.271,p.196-205, 1999.
    16. Wells K.E., Korsunsky A.M., Strain analysis in composites using synchrotron X-ray diffraction, EXPERIMENTAL MECHANICS, VOLS 1 AND

    17. 2, 1998, Ch. 219, pp.761-766 ADVANCES IN DESIGN, TESTING AND ANALYSIS
    18. Korsunsky A.M., Wells K.E, Withers P.J., Mapping two-dimensional state of strain using synchroton X-ray diffraction, SCRIPTA MATERIALIA, 1998, Vol.39, No.12, pp.1705-1712
    19. Korsunsky A.M. and Withers P.J., Investigation of residual stress induced crack closure and its effects on fatigue in metal matrix composites, Key Engineering Materials, vols. 127-131, p. 1183-1190, 1997.
    20. Korsunsky A.M., Residual stress evolution in a metal matrix composite subjected to plastic bending, in T. Ericsson, Ed., Proc. 5th Intl. Conf. on Residual Stresses (ICRS-5), Linkoping, Sweden, 16-18 June, 1997.
    21. Watts M.R., Withers P.J., Korsunsky A.M. and Fitzpatrick M.E., X-ray and neutron diffraction measurement of micro and macrostresses in metal matrix composites, in Proc. ECRS4, Cluny-en-Bourgogne, May 1996.
    22. Korsunsky A.M., Fitzpatrick M.E., and Withers P.J., Neutron diffraction measurement and modelling of stresses around fatigue cracks in Al/SiC composites, in Proceedings of the Tenth Intl. Conf. on Composite Materials (ICCM-10), A.Poursartip and K.Street, eds., Whistler B.C., Canada, 14-18 August, 1995, vol.1, pp.545-552.

    Elasticity and Plasticity

    1. Korsunsky, A. M. (2001). The influence of punch blunting on the elastic indentation response. Journal of Strain Analysis for Engineering Design 36(4): 391-400.
    2. Korsunsky A.M., (4.1.1a) Elastic behavior of materials: Continuum aspects, contributed to Elsevier Encyclopedia of Materials Science and Technology, 2001.
    3. Korsunsky A.M. and Withers P.J., Plastic bending of a residually-stressed beam, Intl. J. Solids and Struct., v.34, no.16, pp.1985-2002, 1997.
    4. Korsunsky A.M., Axisymmetric inclusion in one of two perfectly bonded dissimilar elastic half spaces, J. Appl. Mech. - Trans. ASME, v.64, no.3., pp.697-700, 1997.
    5. Korsunsky A.M., An analysis of residual stresses and strains in shot peening, in T. Ericsson, Ed., Proc. 5th Intl. Conf. on Residual Stresses (ICRS-5), Linkoping, Sweden, 16-18 June, 1997.
    6. (author's draft) Korsunsky A.M., The Somigliana ring dislocation revisited. 1. Papkovich potential solutions for dislocations in an infinite space, J. Elasticity, v.44, no.2, pp.97-114, 1996.
    7. (author's draft) Korsunsky A.M., The Somigliana ring dislocation revisited. 2. Solutions for dislocations in a half space and in one of two perfectly bonded dissimilar half space, J. Elasticity, v.44, no.2, pp.115-129, 1996.
    8. Korsunsky A.M., Fundamental eigenstrain solutions for axisymmetric crack problems, J. Mech. Phys. Solids, v.43, pp.1221-1241, 1995.
    9. Korsunsky, A.M. The Solution of Axisymmetric Crack Problems in Inhomogeneous Media, D.Phil. Thesis, University of Oxford, 1994 (on request).
    10. Korsunsky A.M., Ring nuclei of strain for bonded dissimilar elastic half spaces (with particular application to axisymmetric crack problems), Report OUEL 1966/92, Dept. Eng. Sci., Oxford, 1992.

    Tribology

    1. Ma L.F. and Korsunsky A.M., An efficient numerical method for the solution of sliding contact problems, Int. J. Numer. Meth. Engng 64:12361255, 2005.(DOI: 10.1002/nme.1428).
    2. Ma, L.F. and A.M. Korsunsky, Fundamental formulation for frictional contact problems of coated systems. International Journal of Solids and Structures, 2004. 41(11-12): p. 2837-2854.
    3. Korsunsky, A. M, The influence of punch blunting on the elastic indentation response. Journal of Strain Analysis for Engineering Design 36(4): 391-400, 2001.
    4. Tuck J.R., Korsunsky A.M., Bhat D.G., Bull S.J., Indentation hardness evaluation of cathodic arc deposited thin hard coatings. Surf. and Coat. Technol., v. 139, pp. 63-74, 2001.
    5. Tuck J.R., Korsunsky A.M., Bull S.J., Davidson R.I., On the Application of the Work-of-Indentation Approach to Depth-Sensing Indentation Experiments in Coated Systems. Surf. and Coat. Technol., v. 137, pp. 217-224, 2001.
    6. Tuck J.R., Korsunsky A.M., The influence of coating cracking and delamination on the hardness coated systems, Proceedings of 13th Euro Conf on Fracture, (Elsevier Science), Sep 2000, San Sebastian, Spain.
    7. Tuck J.R., Korsunsky A.M., Davidson R.I. and Bull S.J., Design for hardness of electroplated Ni coatings, Transactions of the Institute of Metal Finishing, v.78, p.105-109, 2000.
    8. Tuck J.R., Korsunsky A.M., Davidson R.I., Bull S.J., Elliott D.M., Modelling of the hardness of elastroplated nickel coatings on copper substrates. Surf. and Coat. Technol., v. 127, pp.1-8, 2000.
    9. Korsunsky A.M., McGurk M.R., Bull S.J., and Page T.F., On the hardness of coated systems, Surf. and Coat. Technol., v. 99, pp.171-183, 1998.
    10. Bull S.J., Korsunsky A.M., Mechanical properties of thin carbon overcoats, Tribology Intl, v.31, pp.547-551, 1998.
    11. Korsunsky A., Warren P.D., and Hills D.A., Impact Fracture Thresholds in Brittle Solids, Wear, v.186-187, pp.99-104, 1995.

    Fracture Mechanics

    1. Korsunsky, A.M. and K. Kim, Determination of essential work of necking and tearing from a single tensile test. International Journal of Fracture, 2005. 132(3): p. L37-L44.
    2. Miklashevich, I. A., A. V. Chigarev, A.M. Korsunsky. (2001). Variational determination of the crack trajectory in inhomogeneous media. International Journal of Fracture 111(2): L29-L34.
    3. Korsunsky, A. M. (2001). Debonding of a weak interface in front of a through-thickness crack. International Journal of Fracture 109(4): L35-L40.
    4. Korsunsky A.M., Evans J.T., Analysis of cohesive zones in cracks and slip bands using hypersingular interpolative quadratures, Int. J. Fracture, v.104, pp.L37-42, 2000.
    5. Korsunsky A.M., Hills D.A., Solution of axisymmetric crack problems using distibuted dislocation ring dipoles, J. Strain Anal., v.35, pp. 373-382, 2000.
    6. Shaw B.A., Korsunsky A.M., Evans J.T., Surface treatment and residual stress effects on the fatigue strength of carburised gears, 12th Euro Conf on Fracture (ECF-12) - Fracture From Defects, K.J. Miller, ed., pp. 157-162, Sheffield, UK, 14-18 Sep 1998.
    7. Korsunsky A.M., and Hills D.A., The solution of crack problems using distributed strain nuclei, Proceedings of the Inst Mech Eng Part C - Journal of Mechanical Engineering Science, 1996, v.210, No.1, pp.23-31, 1996.
    8. Korsunsky A.M., and Hills D.A., The solution of plane crack problems by dislocation dipole procedures, Journal of Strain Analysis, v.30, pp.21-27, 1995.
    9. Dyskin A.V., Ustinov K.B., and Korsunsky A.M., On modelling of defect interaction, Int. J. Fract., v.71, no.4, pp.R79-83, 1995.
    10. Korsunsky, A.M. The Solution of Axisymmetric Crack Problems in Inhomogeneous Media, D.Phil. Thesis, University of Oxford, 1994.
    11. Galybin A.N., Dyskin A.V. and Korsunsky A.M., An investigation of the stress field singularity at the mouth of a surface-breaking crack, Int. J. Solids and Structures, v.29, no.3, pp.271-277, 1992.

    Singular Integral Equations

    1. Hills, D.A., D. Dini, A. Magadu, and A.M. Korsunsky, A review of asymptotic procedures in stress analysis: known solutions and their applications. Journal of Strain Analysis for Engineering Design, 2004. 39(6): p. 553-568.
    2. Duo, P., A.M. Korsunsky, and D.A. Hills, The application of asymptotic analysis for modes I and III semi-infinite wedge solutions to a circumferentially notched shaft. Journal of Strain Analysis for Engineering Design, 2005. 40(3): p. 255-262.
    3. Ma, L.F. and A.M. Korsunsky, A note on the Gauss-Jacobi quadrature formulae for singular integral equations of the second kind. International Journal of Fracture, 2004. 126(4): p. 399-405.
    4. Ma, L.F. and A.M. Korsunsky, Effect of friction on edge singularities in slip bands. International Journal of Fracture, 2003. 123(1-2): p. L143-L150.
    5. Korsunsky A.M., Gauss-Chebyshev quadratures for strongly singular integrals, QUARTERLY OF APPLIED MATHEMATICS, v.56, p. 461-472, 1998.
    6. Korsunsky A.M., Gauss-Jacobi quadratures for hypersingular integrals, in Proc. 1st UK Conf. on Boundary Integral Methods, pp.164-177, L. Elliott, D.B. Ingham, D. Lesnic, eds., Leeds, 30 June - 1 July, 1997.

    Materials Engineering

    1. Korsunsky, A.M., K. Kim, and L.R. Botvina, An analysis of defect size evolution. International Journal of Fracture, 2004. 128(1-4): p. 139-145.
    2. Korsunsky A.M., On the modelling of fibre micro-buckling in metal matrix composites, presented at FRC'98, 8th Intl Conf. on Fibre Reinforced Composites, (A.G.Gibson, ed.), Newcastle upon Tyne, April 1998.

    Rock Mechanics

    1. Korsunsky A.M., Love channel waves propagation along a seam with transversal isotropy, VINITI, 548-B87, pp.27-32, 1987 (in Russian).
    2. Korsunsky A.M., Application of the boundary element technique for the numerical analysis of the stress field in heavy elastic rock mass with curvilinear surface, VINITI, 8407-B87, pp.41-47, 1987 (in Russian).
    3. Korsunsky A.M., The influence of the surface profile on the stress state of a compressed elastic rock mass containing a soft layer, Simferopol Univ. Rock Mechanics Summer School, 1988 (in Russian).
    4. Korsunsky A.M., Adaptation of BEM Techniques for Quick Elastic Analysis of Situations in Mining Industry, M.Sc. Thesis, Moscow Institute of Physics and Technology, Moscow, 1989 (in Russian).
    5. Korsunsky A.M., Ring L.M., A combined numerical-analytical technique for the stress analysis in the vicinity of a mined layer, in Proc. Intl. Conf. on Mechanics of Jointed and Faulted Rock (MJFR-90), April 1990, Vienna.

    Book

    Hills D.A., Dai D.N., Kelly P.A., and Korsunsky A.M. Solution of Crack Problems: The Distributed Dislocation Technique, in book series: Solid Mechanics and its Applications, Kluwer Academic Publishers, Dordrecht, 1996.


    This page was last modified on 9 June 2000.


    Return to AMK home page