Processing of Advanced Materials Group

Selected journal papers



Enhancing the supercapacitor behaviour of Fe3O4/FeOOH coaxial nanowire-carbon nanotube hybrid electrodes in aqueous electrolytes, L. O'Neill, C. Johnston and P.S. Grant, J. Power Sources, 274 (2015), 907915. doi:10.1016/j.jpowsour.2014.09.15

A study on core-shell nanoparticles and enhanced polarisation in polymer based dielectrics, A. Mahadevegowda, N.P. Young and P.S. Grant, Nanotech., 25 (2014) 475706. doi:10.1088/0957-4484/25/47/475706

NiZn ferrite/Fe hybrid epoxy-based composites: extending magnetic properties to high frequency, Y. Wang and P.S. Grant, Appl. Phys. A, 117 (2014), 477-483. doi:10.1007/s00339-014-8686-7

A hybrid arc spray forming technique for the manufacture of Ni superalloy IN617, A. Sato, M. Taneike, I. Okada and P.S. Grant, Mat. Sci. Eng. Techn., 45 (2014), 758-764. doi:10.1002/mawe.201400312

Electron microscopy of multi-layered polymer-nanocomposite based dielectrics, A. Mahadevegowda, N.P. Young, P.S. Grant, J. Phys.: Conf. Series, 522 (2014), 012041. dio:10.1088/1742-6596/522/1/012041

Microstructural evolution at Cu/Sn-Ag-Cu/Cu and Cu/Sn-Ag-Cu/Ni-Au ball grid array interfaces during thermal ageing, V.M.F Marques, C. Johnston and P.S. Grant, J. Alloys & Compounds, 613 (2014), 387-394. doi:10.1016/j.jallcom.2014.05.200

Spray processing of TiO2 nanoparticle/ionomer coatings on carbon nanotube scaffolds for solid-state supercapacitors, C. Huang, N.P. Young and P.S. Grant, J. Mat. Chem. A, 2 (2014), 11022-11028. doi:10.1039/C4TA02188F

The structural changes of yttria in ferritic ODS alloys during mechanical attrition, I. Hilger, M. Tegel, M. Gorley, P.S. Grant, T. Weissgarber and B. Kieback, J. Nucl. Mat. 447 (2014), 242-247. doi: 10.1016/j.jnucmat.2014.01.026

A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in a Al-15Cu alloy, E. Liotti, A. Lui, R. Vincent, S. Kumar, Z. Guo, T. Connolley, M. Hart, L. Arnberg, R. Mathiesen and P.S. Grant, Acta Mat., 70 (2014), 228-239. doi: 10.1016/j.actamat.2014.02.024

An in-situ powder neutron diffraction study of nano-precipitate formation during processing of oxide-dispersion strengthened ferritic steels, H. Zhang, M.J. Gorley, K.B. Chong, M.E. Fitzpatrick, S.G. Roberts and P.S. Grant, J. Alloys & Compounds, 582 (2014) 769-773. doi: 10.1016/j.jallcom.2013.08.069

Phase field study of the tip operating state of a freely growing dendrite against convection using a novel parallel multigrid approach, Z. Guo, J. Mi, S. Xiong and P.S. Grant, J. Comp. Phys., 257 (2014), 278-297. doi: 10.1016/j.jcp.2013.10.004

Phase field simulation of binary alloy dendrite growth under thermal- and forced-flow fields: an implementation of the parallel multigrid approach, Z. Guo, J. Mi, S. Xiong and P.S. Grant, Mat. Trans. B., 44B (2013), 924-937. doi:10.1007/s11663-013-9861-5

Layer-by-layer spray deposition and unzipping of single-wall carbon nanotube-based thin film electrodes for electrochemical capacitors, C.A. Huang, N. Grobert, A.A.R. Watt, C. Johnston, A. Crossley, N.P. Young and P.S. Grant, Carbon, 61 (2013), 525-536. doi:10.1016/j.carbon.2013.04.107

A synchrotron X-ray radiography investigation of induced dendrite fragmentation in Al-15wt%Cu, E. Liotti, A. Lui, R. Vincent, S. Kumar, Z. Guo, T. Connolley, M. Hart, L. Arnberg, R.H. Mathiesen and P.S. Grant, Mat. Sci. Forum, 765 (2013), 210-214. doi:10.4028/www.scientific.net/MSF.765.210

One-step spray processing of high power all-solid-state supercapacitors, C.A. Huang and P.S. Grant, Scientific Reports, 3 (2013), 2393. doi:10.1038/srep02393.

Heavily loaded ferrite-polymer composites to produce high refractive index materials at centimetre wavelengths, L. Parke, I.R. Hooper, R.J. Hicken, C.E.J. Dancer, P.S. Grant, I.J. Youngs, J.R. Sambles and A.P. Hibbins, APL Mat., 1 (2013), 042108. doi:10.1063/1.4824039

Scaleable ultra-thin and high power density graphene supercapacitor electrodes manufactured by aqueous exfoliation and spray deposition, B. Mendoza-Sanchez, B. Rasche, V. Nicolosi and P.S. Grant, Carbon, 52 (2013), 337-346. doi:10.1016/j.carbon.2012.09.035

An investigation of nanostructured thin film a-MoO3-based supercapacitor electrodes in an aqueous electrolyte, B. Mendoza-Sanchez, T. Brousse, C. Ramirez-Castro, V. Nicolosi and P.S. Grant, Electrochimica Acta, 91 (2013), 253-260. doi:10.1016/j.electacta.2012.11.127

Influence of cooling rate on the Fe bearing intermetallic formation in an AA6063 Al alloy, A. Verma, S. Kumar, P.S. Grant and K.A.Q. OReilly, J. Alloys and Compounds, 555 (2013), 274-282.doi: 10.1016/j.jallcom.2012.12.077

Nanomechanical characterization of Sn-Ag-Cu joints at elevated temperature. Part 1: Youngs modulus, hardness and deformation mechanism, V.M.F. Marques, C. Johnston and P.S. Grant, Acta Mat., 61 (2013), 2460-2470. doi:10.1016/j.actamat.2013.01.019

Nanomechanical characterization of Sn-Ag-Cu joints at elevated temperature. Part 2: Nanoindentation creep and the relationship with uniaxial creep, V.M.F. Marques, C. Johnston and P.S. Grant, Acta Mat., 61 (2013), 2471-2480. doi:10.1016/j.actamat.2013.01.020

Charge storage properties of MoO3/SWCNT-COOH composite electrode in LiClO4 propylene carbonate, B. Mendoza-Sanchez and P.S. Grant, Electrochimica Acta, 98 (2013), 294-302. doi:10.1016/j.electacta.2013.03.072

An electrochemical microactuator based on highly textured LiCoO2, H. Zhang and P.S. Grant, Sensors and Actuators B: Chemical, 176, (2013), 52-57. doi: 10.1016/j.snb.2012.08.079

Fe bearing intermetallic phase formation in a wrought Al-Mg-Si alloy, S. Kumar, P.S. Grant and K.A.Q. O'Reilly, Trans. Indian Inst. Mat., 65 (2012), 553-557. doi:10.1007/s12666-012-0221-y

A high-speed imaging and modeling study of dendrite fragmentation caused by ultrasonic cavitation, D. Shu, B. Sun, J. Mi and P.S. Grant, Mat. Trans. A., 43 (2012), 3755-3766, doi:10.1007/s11661-012-1188-3

An implicit parallel multigrid computing scheme to solve coupled thermal-solute phase-field equations for dendrite evolution, Z. Guo, J. Mi and P.S. Grant J. Computational Phys., 231 (2012), 1781-1796. doi:10.1016/j.jcp.2011.11.006

An Al-Si-Ti hierarchical metal-metal composite manufactured by co-spray forming, A.J. Kelly, J. Mi, G.V. Sinha, P. Krug, F. Crosa, F. Audebert and P.S. Grant, J. Mat. Proc. Tech., 211 (2011), 2045-2049. doi:10.1016/j.jmatprotec.2011.07.001

The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices, X. Zhao, B. Mendoza Sanchez, P.J. Dobson and P.S. Grant, Nanoscale, 3 (2011), 839-855. doi: 10.1039/c0nr00594k

Fully vacuum-deposited planar heterojunction polymer solar cells, P. Kovacik, G. Sforazzini, A.G. Cook, S. Wllis, P.S. Grant, H.E. Assender and A.A.R. Watt, ACS Appl. Mat. Interfaces, 3 (2011), 11–15. doi: 10.1021/am1008985

A quantitative study of solute diffusion field effects on heterogeneous nucleation and the grain size of alloys, D. Shu, B. Sun, J. Mi and P.S. Grant, Acta Mat., 59 (2011), 2135-2144. doi:10.1016/j.actamat.2010.12.014

Spray forming of bulk ultrafine grained Al-Fe-Cr-Ti, C. Banjongprasert, S.C. Hogg, E. Liotti, C.A. Kirk, J. Mi and P.S. Grant, Mat. Trans. A., 41 (2010), 3208-3215. doi: 10.1007/s11661-010-0386-0

Printable magnetite and pyrrole-treated magnetite based supercapacitors, X. Zhao, C. Johnston, A. Crossley and P.S. Grant, J. Mat. Chem. A, 20 (2010), 7637-7644. doi: 10.1039/c0jm00028k

Microstructure and property development in spray formed and extruded Al-Mg-Li-Zr alloys for aerospace and autosport applications, S.C. Hogg, J. Mi, K.E. Nilsen, E. Liotti and P.S. Grant, Mat.-wiss. u.Werkstofftech, 41 (2010), 562-567. doi: 10.1002/mawe.201000643

Colloidal synthesis of lead oxide nanocrystals and their optoelectronic properties, C.A. Cattley, A. Stavrinadis, R. Beal, J. Moghal, A.C. Cook, P.S. Grant, J.M. Smith, H.E. Assender and A.A.R. Watt, Chem. Comm., 46 (2010), 2802–2804. doi: 10.1039/b926176a.

SnS/PbS nanocrystal heterojunction photovoltaics, A. Stavrinadis, J.M. Smith, C.A. Cattley, A.C. Cook, P.S. Grant and A.A.R. Watt, Nanotechnology, 21 (2010), 185202 (7pp). doi: 10.1088/0957-4484/21/18/185202.

Fabrication and electrical properties of bulk textured LiCoO2, H. Zhang, P.J. Baker and P.S. Grant, J. Am. Ceram. Soc., 93 (7), 2010, 1856-1859. doi: 10.1111/j.1551-2916.2010.03634.x

Modeling the deposition dynamics of a twin-atomizer spray forming system, G. Zhang, Z. Li, Y. Zhang, J. Mi and P. S. Grant, Mat. Trans. B, 41 (2010) 303-307. doi: 10.1007/s11663-009-9333-0

Modelling and experiments concerning re-melting phenomena and their role in microstructural evolution in spray formed Ni superalloys, Y. Zhang, Z. Guo, G. Zhang, J. Mi and P.S. Grant, Mat. Sci. Forum, 654-656 (2010), 1363-1366. doi:10.4028/www.scientific.net/MSF.654-656.1363

Phase field modelling of dendrite fragmentation during thermal shock, Z. Guo, J. Mi and P.S. Grant, Mat. Sci. Forum, 654-656 (2010), 1524-1527. doi:10.4028/www.scientific.net/MSF.654-656.1524

Refinement of TiB2 in Al-Ti-B grain refiner alloys by ultrasound and the effect on Al grain size, D. Shu, B.D. Sun, J. Mi and P.S. Grant, Mat. Sci. Forum, 654-656 (2010), 958-961. doi:10.4028/www.scientific.net/MSF.654-656.958

Two-dimensional mapping of the mechanical properties of Pb-free solders for reliability optimization, V. Marques, C. Johnston and P.S. Grant, J. Microel. Electronic Packaging, 6, (2009), 182-185.

A novel hybrid supercapacitor with a carbon nanotube cathode and an iron oxide/carbon nanotube composite anode, X. Zhao, C. Johnston and P. S. Grant, J. Mat. Chem. A, 19 (2009), 8755 - 8760, doi: 10.1039/b909779a

Arc sprayed steel: microstructure in deep substrate features, A.P. Newbery and P.S. Grant, J. Thermal Spray Techn., 18 (2009), 256-271. doi: 10.1007/s11666-009-9300-y

Spray deposition of steam treated and functionalized single and multi-walled carbon nanotube films for supercapacitors, X. Zhao, W. Wang, B.T. Chu, B. Ballesteros, W. Wang, C. Johnston, J.M. Sykes and P.S. Grant, Nanotechnology, 20 (2009), 065605, doi:10.1088/0957-4484/20/6/065605.

Spray deposited fluoropolymer/multi-walled carbon nanotube composite films with high dielectric permittivity at low percolation threshold, X. Zhao, A.A. Koos, B.T.T. Chu, C. Johnston, N. Grobert, P.S. Grant, Carbon, 47 (2009), 561-569. doi:10.1016/j.carbon.2008.10.042.

Spray deposition of polymer nanocomposite films for dielectric applications X. Zhao, C. Hinchliffe, C. Johnston, P.J. Dobson and P.S. Grant, Mat. Sci. Eng. B, 151 (2008), 140–145. doi:10.1016/j.mseb.2008.05.024.

Modelling the shape and thermal dynamics during the spray forming of Ni superalloy rings. Part 1: droplet deposition, splashing and re-deposition J. Mi and P.S. Grant, Acta Mat., 56 (2008), 1588-1596, doi:10.1016/j.actamat.2007.12.021.

Modelling the shape and thermal dynamics during the spray forming of Ni superalloy rings. Part 2: heat flow and solidification, J. Mi and P.S. Grant, Acta Mat., 56 (2008), 1597-1608, doi:10.1016/j.actamat.2007.12.022.

An electrochemical study of repassivation of aluminium alloys with SEM examination of the pit interiors using resin replicas, K.L. Moore, J.M. Sykes and P.S. Grant, Corros. Sci., 50 (2008), 3233-3240. doi:10.1016/j.corsci.2008.08.027.

Pitting corrosion of spray formed Al–Li–Mg alloys, K.L. Moore, J.M. Sykes, S.C. Hogg and P.S. Grant, Corros. Sci., 50 (2008), 3221-3226. doi:10.1016/j.corsci.2008.08.012

The use of interfacial 3D geometry to control stress distributions in W coatings for fusion armour applications, G. Thomas, R. Vincent, G. Matthews, B. Dance and P.S. Grant, Mat. Sci. Eng. A, 477 (2008), 35–42. doi:10.1016/j.msea.2007.05.120

Multiphysics modelling of the spray forming process, J. Mi, U. Fritsching, O. Belkessam, I. Garmendia, A. Landaberea and P.S. Grant, Mat. Sci. Eng. A, 477 (2008), 2–8. doi:10.1016/j.msea.2007.08.083

Solidification in spray forming, P.S. Grant, Mat. Trans. A, 38A (2007), 1520—1529. doi:10.1007/s11661-006-9015-3

Processing, microstructure and property aspects of a spray cast Al-Mg-Li-Zr alloy, S.C. Hogg, I.G. Palmer, L.G. Thomas and P.S. Grant, Acta Mat., 55 (2007), 1885–1894. doi:10.1016/j.actamat.2006.10.057

Optimisation of spray forming Ni superalloys via process modelling and on-line monitoring, J. Mi and P.S. Grant, Mat. Sci. Forum, 546-549 (2007), 1327-1332.

Optimal robot path for minimizing thermal variations in a spray deposition process, P.D.A. Jones, S.R. Duncan, T. Rayment and P.S. Grant, IEEE Trans. Control Systems Techn., 15 (2007), 1-11. doi:10.1109/TCST.2006.883196

Evolution of percolation properties in nanocomposite films during particle clustering, T.K.H. Starke, C. Johnston and P.S. Grant, Scripta Mat., 56 (2007), 425-428. doi:10.1016/j.scriptamat.2006.10.034.

Microstructure evolution of vacuum plasma sprayed CoNiCrAlY coatings after heat treatment and isothermal oxidation, P. Poza and P.S. Grant, Surf. Coatings Techn., 201 (2006), 2887-2896. doi:10.1016/j.surfcoat.2006.06.001

Scientific, technological and economic aspects of rapid tooling by electric arc spray forming, A. Roche, S.R. Duncan and P.S. Grant, J. Thermal Spray Tech., 15 (2006), 796-801. doi:10.1361/105996306X1468794

The effect of particle distribution inhomogeneities on the dielectric properties of polymer/ceramic films, T.K.H. Starke, C. Johnston, S. Hill, P.D. Dobson and P.S. Grant, J. Phys. D: Appl. Phys., 39 (2006), 1305-1311.

Microstructural characterisation of spray formed Si-30Al for thermal management applications, S. Hogg, A. Lambourne, A. Ogilvy and P.S. Grant, Scripta Mat., 55 (2006), 111-114.

Oxidation during the electric arc spray forming of steel, A.P. Newbery and P.S. Grant, J. Mat. Processing Techn., 178 (2006), 259-269.

An investigation of novel spraycast Al-Mg-Li-Zr-(Sc) alloys, S.C. Hogg, I.G. Palmer and P.S. Grant, Mat. Sci. Forum, 519-521 (2006), 1629-1633.

Applied periodic l-infinity control: presenting prototype designs for a real spray form tooling process, V.A. Tsachouridis, P.D.A. Jones, S.R. Duncan and P.S. Grant, Control Eng. Practice, 14 (2006), 1477-1493.

Modelling the heat flow in spray formed steel shells for tooling applications, T. Rayment and P.S. Grant, Met. Mat. Trans. B, 37B (2006), 1037-1047.

Numerical heat transfer modelling in spray formed IN718 billets, Z. Shi, J. Mi and P. S. Grant, Mat. Sci. Forum, 475-479 (2005), 2803-2806.

Modelling the shape evolution and heat flow in spray formed ring preforms, J. Mi, Z. Shi and P.S. Grant, Mat. Sci. Forum, 475-479 (2005), 2807-2810.

Dynamic densification of metal matrix coated fibre composites: modelling and processing, H.X. Peng, F.P.E. Dunne, P.S. Grant and B. Cantor, Acta Mat., 53 (2005), 617-628.

The velocity and temperature of steel droplets during electric arc spraying, A.P. Newbery, P.S. Grant and R.A. Neiser, Surf. Coatings Techn., 195 (2005), 91-101.

Non-equilibrium microstructure and thermal stability of plasma sprayed Al-Si coatings, K.-H. Baik, H.-K. Seok, H.-S. Kim and P.S. Grant, J. Mat. Res., 20 (2005) 2038-2045.

Oxide formation in the sprayform tool process, S. Hoile, T.Rayment, P.S. Grant and A. Roche, Mat. Sci. Eng. A., 383 (2004), 50-57.

A particle image velocimetry investigation of in-flight and deposition behaviour of steel droplets during electric arc sprayforming, A.P. Newbery, T. Rayment and P.S. Grant, Mat. Sci. Eng. A, 383 (2004), 137-145.

Phase transformations and control of residual stresses in thick spray formed steel shells, S. Hoile, T. Rayment and P.S. Grant, Met. Mat. Trans. B, 35B (2004), 1113-1122.

The equiaxed-banded microstructural transition during low pressure plasma spraying, K.H. Baik, P.S. Grant and B. Cantor, Acta Mat., 52 (2004), pp. 199-208.

Low pressure plasma-sprayed Al2O3 and Al2O3/SiC nanocomposite coatings from different feedstock powders, S. Jiansirisomboon, K. J. D. MacKenzie, S. G. Roberts and P. S. Grant, J. European Ceram. Soc., 23 (2003), 961-976.

Fibre re-arrangement and matrix softening phenomena in matrix coated fibre composites during vacuum hot pressing consolidation, H.X. Peng, F.P.E. Dunne, K.H. Baik and P.S. Grant, Mat. Sci. Eng., A346 (2003), 246-253.

An inverse problem in modelling liquid metal spraying, Z. Djuric and P.S. Grant, Applied Mathematical Modelling, 27 (2003), 379-396.

Control of temperature profile for a spray deposition process, P.D.A. Jones, S.R. Duncan, T. Rayment and P.S. Grant, IEEE Trans. Control Sys. Tech., 11 (2003), No. 5, 656-667.

Large arc voltage fluctuations and droplet formation in electric arc spraying, A.P. Newbery and P.S. Grant, Powder Met., 46 (2003), No. 3, 229-235.

Characterisation of electric arc spray formed Ni superalloy IN718, M.K. Hedges, A.P. Newbery and P.S. Grant, Mat. Sci. Eng., A326 (2002), 79-91.

Isothermal grain coarsening of spray formed alloys in the semi-solid state, E.D. Manson-Whitton, I.C. Stone, J.R. Jones, P.S. Grant and B. Cantor, Acta Mat., 50 (2002), 2517-2535.

Semi-empirical method for process analysis on electric arc spray forming of Fe-0.06\%C steel rings, H.K. Seok, H.J. Llewellyn, J.C. Lee and P.S. Grant, Powder Met., 45 (2002), 139-145.

Interface effects during consolidation in titanium alloy components locally reinforced with matrix-coated fibre composite, J. Carmai, K.H. Baik, F.P.E. Dunne, P.S. Grant and B. Cantor, Acta Mat., 50 (2002), 4981-4993.

Chemical interaction between Sigma 1140+ fibre and Ti-6Al-4V, K-H. Baik and P.S. Grant, Scripta Mat., 44 (2001), 607-612.

Ink-jet printing of wax-based alumina suspensions, K.A.M. Seerden, N. Reis, J.R.G. Evans, P.S. Grant, J.W. Halloran and B. Derby, J. American Ceram. Soc., 84 (2001) 2514-2520.

Two dimensional simulation of liquid metal spray deposition onto a complex surface II: splashing and redeposition, Z. Djuric and P.S. Grant, Modell. Simul. Mat. Sci. Eng.,
9 (2001), 111-127.

Process study, microstructure and matrix cracking of SiC fiber reinforced MoSi2 based composites, K.H. Baik and P.S. Grant, J. Thermal Spray Tech., 10 (2001), 584-591.

Strength degradation of SiC fibre during manufacture of titanium matrix composites by plasma spraying and hot pressing, K.H. Baik and P.S. Grant, Met. Mat. Trans., 32A (2001), 3133-3142.

Ink jet printing of alumina suspensions in liquid wax, N. Reis, K.A.M. Seerden, P.S. Grant, B. Derby, and J.R.G. Evans, British Ceramic Proceedings, 62 (2001) 39-47.

Droplet splashing and microstructure in electric arc spraying, A.P. Newbery and P.S. Grant, J. Thermal Spray Tech., 9 (2000), 250-258.

Modelling and experimental analysis of vacuum plasma spraying. Part I: Prediction of initial plasma properties at plasma gun exit, Y.Y. Zhao, P.S. Grant and B. Cantor, Modell. Simul. Mat. Sci. Eng., 8 (2000), 497-513.

Modelling and experimental analysis of vacuum plasma spraying. Part II: Prediction of temperatures and velocities of plasma gases and Ti particles in a plasma jet, Y.Y. Zhao, P.S. Grant and B. Cantor, Modell. Simul. Mat. Sci. Eng., 8 (2000), 515-540.

Preliminary characterisation of a plasma sprayed MoSi2/Sigma SiC fibre monotape, A. M. Baker, P.S. Grant, R.G. Castro, H. Kung, Mat. Sci. Eng. A, A261 (1999), 196-203.

Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt\%Si produced by low pressure plasma spraying, K.H. Baik and P.S. Grant, Mat. Sci. Eng. A, A265 (1999), 77-86.

Two dimensional simulation of liquid metal spray deposition onto a complex surface, Z. Djuric and P.S. Grant, Modell. Simul. Mat. Sci. Eng., 7 (1999), 553-571.

The response of SiC fibres to vacuum plasma spraying and vacuum hot pressing during the fabrication of titanium matrix composites, A.M. Baker, P.S. Grant and M.L. Jenkins, J. Microscopy, 196 (1999), 162-174.

Hydrogen incorporation in Ti based metal matrix composites fabricated by vacuum plasma spraying and vacuum hot pressing, J.H. Li, P.S. Grant, M.L. Jenkins and B. Cantor, J. Microscopy, 185 (1997), 132-145.

Modelling of droplet behaviour during spray forming using FLUENT, R.P. Underhill, P.S. Grant, B. Cantor and D.J. Bryant, Int. J. Non-Equilibrium Processing, 10 (1997), 201-216.

Development of microstructure in spray formed alloys, B. Cantor, K.H. Baik and P.S. Grant, Prog. Mat. Sci., 42 (1997), 373-392.

Modelling of droplet dynamic and thermal histories during spray forming. Part III: analysis of spray solid fraction, P.S. Grant and B. Cantor, Acta Met. Mat., 43 (1995), 913-921.

Spray forming of Al/SiC metal matrix composites, P.S. Grant, I.T.H. Chang and B. Cantor, J. Microscopy, 177 (1995), 337-346.

Grain growth in spray formed Ni superalloys, R.P. Underhill, P.S. Grant, D.J. Bryant and B. Cantor, J. Mat. Synth. Processing, 3 (1995), 171-179.

Spray forming, P.S. Grant, Prog. Mat. Sci., 39 (1995), 497-545.

Transmission electron microcopy study of Ti/SiCf composites fabricated by vacuum plasma spraying and vacuum hot pressing, J.H. Li, P.S. Grant, M.L. Jenkins and B. Cantor, Phil. Mag. A, 72 (1995), 707-721.

Interface microstructures in Ti based composites using TiB2/C-coated and uncoated SiCf after short-term thermal exposure, J.H. Li, Z.X. Guo, P.S. Grant, M.L. Jenkins, B. Derby and B. Cantor, Composites, 25 (1994), 887-890.

Heat flow in spray formed in Al-4Cu, P.S. Grant, P.P. Maher and B. Cantor, Mat. Sci Eng. A, A179/A180 (1994), 72-76.

Fabrication of Ti/SiCf metal matrix composites by vacuum plasma spraying, Y.Y. Zhao, P.S. Grant and B. Cantor, J. de Physique IV, 3 (C7 III) (1993), 1685-1691.

Modelling of droplet dynamic and thermal histories during spray forming. Part I: Individual droplet behaviour, P.S. Grant, B. Cantor and L. Katgerman, Acta Met. Mat., 41 (1993), 3097-3108.

Modelling of droplet dynamic and thermal histories during spray forming. Part II: effect of process parameters, P.S. Grant, B. Cantor and L. Katgerman, Acta Met. Mat., 41 (1993), 3109-3118.

Microstructure of spray formed Al alloy 2618, R.U. Underhill, P.S. Grant and B. Cantor, Materials and Design, 14 (1993), 45-47.

The microstructure of spray formed Ti-6Al-4V/SiC metal matrix composites, Y.Y. Zhao, P.S. Grant and B. Cantor, J. Microscopy, 169 (1993), 263-267.

Spray forming of aluminium-copper alloys, P.S. Grant, W.T. Kim and B. Cantor, Mat. Sci. Eng. A, A134 (1991), 1111-1114.

A computer model for the trajectories and thermal histories of atomised droplets during spray forming, P.S. Grant, B. Cantor, S. Rogers and L. Katgerman, Cast Metals, 3 (1991), 227-232.

Review: modelling of spray forming, P.S. Grant and B. Cantor, Cast Metals, 4 (1991), 140-151.

Infrared thermal imaging measurement of deposit surface temperatures during spray deposition, P.S. Grant and B. Cantor, Powder Met., 33 (1990), 144-146.

The monitoring of deposit surface temperatures during spray forming by infrared thermal imaging, P.S. Grant, W.T. Kim, B.P. Bewlay and B.Cantor, Scripta Met., 23 (1989), 1651-1656.

Return to Processing of Advanced Materials home