Filters
These Filter set is composed of three different filters: Emission,
Dichroic, and Excitation filter. The filter set is NOT physically
assembled together like in the case of the fluorescent
cubes.
The Filter are used only in the laser scanning modality (Microscope
>> Mode >> Laser Scanning). In this modality the UV2 fluorescent cubes is chosen
automatically by the software.
Configure - opens the
dialog box (below) where different filter sets can be added, removed
and edited.
Close - closes the
dialog box.
Add - adds a new filter set.
Remove - remove
a filter set from the list.
Edit - opens the
dialog box (below) where specific information regarding the filter
set
is stored.
Recall - Loads
a filter set list from file.
Save - Saves the
current filter set list to a file
Close - closes the
dialog box.
Filter set description-
name of filter set.
Excitation Filter
Name - Name of Excitation filter
Excitation Min (nm)-
Minimum wavelength allowed by the Excitation filter.
Excitation Max (nm) - Maximum wavelength
allowed by the Excitation filter.
Dichroic Filter
Name - Name of
Dichroic filter
Dichroic (nm) -
Cut-off for the Dichroic filter.
Emission Filter
Name - Name of
Excitation filter
Emission Min (nm)-
Minimum wavelength allowed by the
Emission filter.
Emission Max (nm) - Maximum wavelength
allowed by the
Emission filter.
OK- closes the dialog
box.